1. Cut the pipe.
Any hacksaw will work.
Rely on our handy installation guide to help you measure exactly how much pipe to cut and exactly where to cut it. Measure twice, cut once, and you’ll be good to go.
2. Attach the unions.
We give you everything you need.
Whether your pipes are 1.5-inch or 2-inch, we have you covered. All you need to do is apply the included glue to the unions and slide them into place over your freshly-cut pipe.
3. Connect your Salt System.
Told you it was easy.
Wrap some of the included plumbers tape around the ends of your Dive system and screw the other half of each union into place on each end of the device. Now reunite each union by screwing them back together and you’re all set.